PEN CASES & STANDS
INKS & REFILLS
SHOP BY BRAND
PLANNERS & AGENDAS
COLORING & PUZZLE BOOKS
LEVENGER PRESS BOOKS
FOR SPORTS FANS
DESK SETS & PADS
BOOKENDS & PAPERWEIGHTS
STORAGE BOXES & BASKETS
JOURNALS & DIARIES
SPECIAL REQUEST CIRCA
DEAL OF THE DAY
LEATHER & FOLIOS OUTLET
PENS & OFFICE OUTLET
Lost Wax, Paradise Found
Because we commission fine artists like the British sculptor
Jon Bickley to create our museum-worthy pen stands and bookends exclusively for our customers,
you'll find these only at Levenger. These functional collectibles are created using the ancient
yet still lovingly practiced art of lost-wax casting to capture the artist's vision in vivid detail.
Each is a member of a limited production run, whether or not it is numbered.
During a visit to our foundry in the Guang Dong province of China, Levenger
founder Steve Leveen and his Mandarin-speaking son Cal spent time with the craftspeople who bring
these pieces to life. They took these photos and worked with the factory managers and our merchandising
team to develop the captions and descriptions you'll find below. Our goal was to provide an unusual
behind-the-scenes look into the lost-wax casting method as it is practiced in the early 21st century.
We hope it will enhance your appreciation for the Levenger art you enjoy in your office and home.
Lost wax is a technique that's been in use for millenia, believed to have originated in the Far East, with
historical citations dating back to the cultures of ancient Egypt, Greece, Rome and India. Believed to be the earliest lost-wax sculpture
is a bronze figurine known as The Dancing Girl, excavated in 1926 from the ruins of the ancient city of Mohenjo-Daro in the Indus Valley
of what is now Pakistan. The figure, which dates back to 3000-1500 BC, now resides in the collection of the National Museum of India in New Delhi.
Coming full circle, with many foundries located in China and India, contemporary
lost-wax or investment casting has gained some technical advances while retaining the same basic methodology.
Today, the factory where our pieces are cast is immaculate, spacious and well-ventilated. Safety is paramount.
And today's lost-wax crafters recycle and reuse many of the materials involved in the process; in particular,
reusing the wax several times—so today's "lost wax" isn't really lost at all, it's collected and used again.
The lost-wax process captures the essence of a one-of-a-kind sculpture with remarkable
accuracy, from forms as varied as the smoothly flowing curves of our
Elephant Pen Holder to the intricacies
of our Captain Flint's Pen Perch
Reading Bear Bookend. It's a rather slow, six-step process, requiring
patience, diligence and skill. The steps are outlined below.
The artist creates a model, often in an oil-based modeling clay that doesn't harden, so that further detail
can be added up until the last minute. This is the maquette (the French word for model), the foundational
image that our artisans will transform into a bronze, brass or cast iron sculpture.
The clay maquette is then covered with silicone rubber to create a negative 3-D image of the sculpture,
preserving all the surface details of the original model. (Before modern silicone rubber was available,
plaster was used.) The rubber is then covered with a plaster of Paris jacket, which will support the sculpture
and keep the mold from changing shape when the hot wax is poured inside. Once the plaster jacket hardens,
it--along with the rubber mold--is removed, sometimes in two or more sections, depending on the intricacy
of the sculpture. The clay maquette is then removed and preserved, and the mold reassembled. (This silicone
mold can be used again and again to create more of the item later on, unless, of course, the artist decides
to "break the mold.")
Now liquid wax is poured into the silicone mold in layers that are allowed to set before additional wax
is poured. Like the maquette, this is a positive image of the sculpture, but this wax version is hollow.
Depending on the piece, the wax mold may be separated into pieces (as with our
parrot pen perch) that will
be cast separately then put back together. When the wax is thick enough, and has cooled and hardened, the
mold will be taken apart again and the wax sculpture carefully removed. Finally, the gating system, the
channeling system where the molten metal will flow and enter the mold cavity, is attached. The system comprises
multiple gates that are connected to the wax patterns and horizontal runners that are attached to the vertical
sprues (openings where the molten metal will enter). Extensions to the gating system called vents are added to
provide a path for built-up gases to escape.
Now the wax mold is carefully bathed in a layer of heat-resistant ceramic to create what is called the investment.
This is achieved by dipping the wax mold into successive powdered silica mixtures (called slurries) and allowing it
to dry after each submersion. For the initial coatings, only the finest grade of silica sand is used to render the
likeness faithfully, then slurries with coarser sand are used for the additional layers. Each coat can take up to
two days to dry, depending on the size of the piece. Once the final silica coating has hardened around the wax,
it's put into a kiln for firing. The wax mold is "lost" during this step, melting away to leave only the ceramic
mold investment. The lost wax is then collected to be reused for the next batch. The investment will be the mold
in which molten bronze, brass or iron will be poured to create the final piece.
The kiln-fired ceramic mold is heated, then molten metal is poured into the sprue and gating system described
earlier to create the final sculpture. After the metal cools, the ceramic mold is broken away to reveal the beauty
Our sculpture is now ready for final cleanup. The remains of the ceramic are sandblasted off the surface, and
parts of the gating system are blowtorched away or machined off to be melted down and reused. If the sculpture
was created in separate pieces, these are now welded together (our
parrot was welded onto its perch, for example).
Finally, the sculpture is painted, glazed and decorated by hand, then refired, polished and packed carefully for
The process can take up to a week or more for each sculpture, but each is meant to be
enjoyed for many lifetimes. Indeed, your Levenger sculpture may, like its historic ancestors, last another 5,000 years.
Returns & Exchanges
Security & Privacy
Catalog Quick Order
Gift Card Balance